EPS Composite Wall Panel Making Machine , Sandwich Wall Board
High speed lightweight concrete panel / eps sandwich mgo wall sheet
Sepecifications of EPS sandwich wall panel mgo board making machine
This kind of machine is made on the basis of our five-year
production of panels. It is not only easy to use, high efficiency,
high quality, but also low-cost.
1. High capacity
This new-style stainless steel machine can make 14 pieces of
2. Lower the cost of production
2.1 We use stainless steel for the mould instead of traditional
steel. Steel mould machines need brushing de-molding agent or the
panels can't be taken out. Stainless steel machines don't need
de-molding agent, this can save both labor and material cost for
manufacturers. It can save around 0.1 USD per square meter.
3. The product quality is better.
Panels made by this kind of machine have better quality than other
kinds. The panel will not be deformed. Its surface is smoother than
4. Specific design for the grooves. It can solve the problems
5. The male and female groove can be made at one time. It is very
easy to use.
6. Specific design for the side mould.
The side mould is fixed onto the machine on one side, but it
doesn’t influence the hydraulic mould opening and closing.
I. Detaild of the production line
|Required Raw Material||Magnesium Oxide Board is made of filling materials, such as sawdust
or all kinds of crushed plant straw (you can select any one kind )
and several chemical raw materials which are token as modified
material after special technology.|
|Technical Index for finished board|
1. Oxygenic index%: 90
2. Level combustion: SO
3. Vertical combustion: SO
4. Water content rate: 10.9%
5. Capacity: 1.15g/cm3
6. Static bending intensity: 169.46Mpa
7. Density: T/ m3 1.13
8. Water resistance: Without chalking for 24 hours and there is no
change on surface
9. No Three-wastes (waste water, waste gas and waste residue), no
pollution and environmental protection
|Structure Principle for Machine||Magnesium Oxide Board Machine with fashionable design, reasonable
structure, stable running manufactured board of even thickness in
large production once through double- roller-extruding technology.
This production line is equipped with shaking device which remove
inside and outside air bubble, so our board is more compact. In
addition, we use the no-woven cloth as the separating film to
increase the toughness and strength of the board. The machine can
be adjusted arbitrarily, and then produce the board with the
thickness of 2-60mm, the biggest width of 1, 300mm and unlimited
length. So you can adjust the thickness of board at will.|
II Machine Advantages
1.Reasonable design,good manufacturing process,great appearance
design,high efficiency of automation.
2.The finished board don’t need high temperature drying, air drying
and under the normal temperature, they will dry well indoor.
3. High Intensity without deformation
4. This is a green environmental protection project because that
there is no waste water materials and waste gas during processing.
IV. Factory Service
We not only supply MgO Board Production Lines, but also provide
other services like:
1. Assemble machines at customer's factory
2. Production techniques training
3. Machine up-grade and maintenance
Welcome you to our company for a site visit, we will service for