1. Product Introduction
straw board machine mainly produce different kinds of sheets, which
can be used for ceiling, wall skirting, decorating of indoor walls
and lining panels for furniture. Also can replace three-ply sheet,
five-ply sheet, flakesheet, MDF (Medium Density Fibersheet ) and
2. Raw material and cost analysis
The wheat straw board is made of filling materials, such as sawdust
and all kinds of crushed plant straw (you can select any one kind ) and several chemical raw materials
which are token as modified material after special technology. The board has such features: quickly
hard, high strength, large format, fireproofing, dampproof and good waterproof performance. It can be
nailed, planed and sticked. The machine can be adjusted arbitrarily, and then produce the board
with the thickness of 2-60mm, the biggest width of 1, 300mm and unlimited length. So you
can adjust the thickness of board at will.
|Names of materials||Each dosage|
Take 1200mm*2400mm*8mm Glass magnesium board an example in china.
3. Technology features
There is not any requirement about high temperature and high
pressure during production processing. The board will be formed at
one time after roller-extruding
under the conditions of normal temperature and normal pressure.
This is a green environmental-protection project, because that
there is no waste water, waste
materials and waste gas during its production processing. The
don’t need high temperature drying, air-drying and watering, and
under the normal temperature, they will dry well indoor.
4. Equipment Model and Product Specification
1. rice straw/rice hust material
2. new economic board
3. 1220x2440mm size
4. thickness 5-25mm
4x8' feet Rice straw/rice husk board making
Technical Index for
1. Oxygenic index%: 90
2. Level combustion: SO
3. Vertical combustion: SO
4. Water content rate: 10.9%
5. Capacity: 1.15g/cm3
6. Static bending intensity: 169.46Mpa
7. Density: T/ m31.13
8. Water resistance: Without chalking for 24 hours and there
is no change on surface
9. No Threewastes (waste water, waste gas and waste
residue), no pollution and environmental protection.
straw Board can be used for ceiling, wall skirting, decorating of
indoor wall and lining board for furniture.It can replace three-ply
board, five-ply board, flakeboard, MDF (Medium Density Fiberboard )
and Gypsum Board.
After purchased the equipment, we will teach relevant technology
for free, and
will go to your factory for installation and testing until you can
qualified product by yourself. Our company will train 2-3 technical
for free until he can get the skill. We will take responsibility
for provide technical consultation and following-up service for a
long time, the equipment warranty
period is one year.